Filters

LFCN-2400-12+
LTCC Low Pass Filter, DC - 2400 MHz, 50Ω

Features
• excellent power handling, 9W
• small size
• 5 sections
• temperature stable
• LTCC construction

Applications
• harmonic rejection
• VHF/UHF transmitters/receivers
• lab use

HFCW-9500+
LTCC High Pass Filter, 10500 - 20000 MHz

Features
• Very good rejection, 36 dB typ.
• Small size 0603 (0.063" X 0.032" X 0.024")
• Temperature stable
• LTCC construction

Applications
• Test and measurements
• Military applications
• Telecommunications and broadband wireless systems

ZFBP-1100-75+
Lumped LC Band Pass Filter, 950 - 1250 MHz, 75Ω

Features
• Low insertion loss, 0.8 dB typ.
• Good VSWR, 1.27:1 typ.
• Small connectorized package
• Broad stopband performance up to 3 GHz

Applications
• Cable / CATV & broadband fiber networks
• Radio navigation satellite
• Radio astronomy

SXBP-693+
Lumped LC Band Pass Filter, 663 - 723 MHz, 50Ω

Features
• Low insertion loss, 1.4dB typ.
• Flat group delay response, 1.5ns typ.
• Miniature shielded package

Applications
• IF signal processing
• Military hi-rel systems
• Harmonic rejection
• Transmitters / Receivers
• Telecommunications and Broadband wireless

Power Splitters

ZX10R-2-183-S+
2 Ways Resistive Power Splitter, DC - 18000 MHz, 50Ω

THE BIG DEAL
•Wide bandwidth, DC to 18 GHz 
• Excellent isolation, 20 dB typ. at 12 GHz 
• Excellent amplitude unbalance, 0.1 dB typ. to 18 GHz
•Good phase unbalance, 3.3° at 12 GHz 
• Patent pending 
• Rugged unibody case

APPLICATIONS
•WIMAX 
• ISM 
• Instrumentation 
• Radar 
• WLAN 
• Satellite communications 
• LTE

Amplifiers

PHA-1H-6+
SMT Linear Amplifier, 50 - 6000 MHz, 50Ω

Product Features
• High IP3, 40.4 dBm typ. at 2.4 GHz
• Gain, 13.8 dB typ. at 2 GHz
• High Pout, P1dB 22 dBm typ. at 2 GHz
• Low noise figure, 2.2 dB @2 GHz
• No external matching components required
• May be used as replacement for WJ AH1a,b

Typical Applications
• Base station infrastructure
• Portable Wireless
• CATV & DBS
• MMDS & Wireless LAN
• LTE

PMA-5456-3+
SMT Low Noise Amplifier, 50 - 6000 MHz, 50Ω

THE BIG DEAL
•Ultra Low Noise Figure, 0.8 dB
•High IP3/Low Current, 60mA
•Wideband, up to 6 GHz
•Low Additive Phase Noise
•Suitable for low phase noise applications

TYPICAL APPLICATIONS
•Cellular
•ISM
•GSM
•WCDMA
•LTE
•WiMAX
•WLAN
•UNII and HIPERLAN

PMA-183PLN-DG+
Die Low Noise Amplifier, 6000 - 18000 MHz, 50Ω

THE BIG DEAL
•Wideband, 6 to 18 GHz
•Excellent Noise Figure, 1.3 dB at 15 GHz
•Positive Gain Slope
•High Directivity, 33dB typ.

APPLICATIONS
•Instrumentation
•Cellular Infrastructure
•Defense

Attenuators

DAT-31R5A-PN-2+
31.5 dB SMT Digital Step Attenuator, DC - 4000 MHz, 50Ω

Product Features
• Immune to latch up
• Excellent accuracy, 0.1 dB Typ
• Parallel control interface
• Fast switching control frequency, up to 1 MHz typ.
• Low Insertion Loss
• High IP3, +52 dBm Typ
• Very low DC power consumption
• Excellent return loss, 20 dB Typ
• Small size 4.0 x 4.0 mm

Typical Applications
• Base Station Infrastructure
• Portable Wireless
• CATV & DBS
• MMDS & Wireless LAN
• Wireless Local Loop
• UNII & Hiper LAN
• Power amplifier distortion canceling loops

Bias Tees

TCBT-203+
0.01-20 GHz BIAS TEE, SMT

THE BIG DEAL
•Ultra-wideband, 10 MHz to 20 GHz
•Very low insertion loss, 0.8 dB
•Excellent VSWR, 1.3:1
•Small footprint, 0.175 x 0.150 x 0.110”

APPLICATIONS
•Biasing amplifiers
•Biasing of laser diodes
•Biasing of active antennas

ZX76-50G-30-V+
31.5 dB Digital Step Attenuator, 100 - 50000 MHz, 50Ω
Connector Type: 2.4mm

THE BIG DEAL 

•  Wideband, operates up to 50 GHz

• Immune to latchup

• High IIP3, 50 dBm

• Low Insertion Loss 

•  Good VSWR, 1.5:1 Typ

• Glitch-less attenuation transitions 

•  Dual or Single supply voltage: Vdd=+3.3V

APPLICATIONS

•  Test Setup

•  5G

•  Satellite Communications

•  X band, S band, C band, KU band, and K band Radars 

•   EW Test Sets